Barrel Corrugated Roll Forming Machine is for thin material from 0.12-0.4mm thinkness. It is very popular in Africa, such as Nigeria, Kenya, South Africa and Senegaln etc.

Parameter

1.Transverse barrel corrugating type.
2.Raw material: thin Galvanized steel sheets, Aluzinc steel sheets etc
3.Sheet width:762mm(2.5 feet),914mm(3 feet),1000mm,1250mm
4.Thickness range:0.1mm to 0.25mm (0.17mm).
5.Sheet Maximum length:4500mm, Thickness: 0.14mm to 0.30mm
6.Pitch:76 mm(+/-1.0mm) or customer(s) required.
7.Depth:18mm(+/-0.5mm) or customer(s) required.
8.Corrugation:large round wave
9.Drive:geared motor 7.5Kw -8kw
10.Forming speed: 9-12 times per min
11.Corrugation roll:barrel length 2500mm-4500mmL.
12.Pitch adjust roll:barrel length 2500mm-4500mmL.
13.Power:380V (50HZ).
14.Capacity: 2-4 Ton per hour

Inquiry Cart 0

Iron Sheet 0.14-0.3mm Roof Roll Forming Machine Barrel Corrugator

Roof Roll Forming Machine

Roof Tile Roll Forming Machine

Down Pipe Roll Forming Machine

Shutter Door Roll Forming Machine

Stud And Track Roll Forming Machine

Cut To Length And Slitting Line

Double Layer Roll Forming Machine

Wall Panel Roll Forming Machine

Floor Deck Roll Forming Machine

Hydraulic Bending Machine

CZ Purlin Roll Forming Machine

Sandwich Panel Roll Forming Machine

Highway Guardrail Roll Forming Machine

Roll Forming Machine Components

Surface Plate Calibration

Granite Surface Plate

Cast Iron Surface Plate

Prepainted Galvanized Steel

Iron Sheet 0.14-0.3mm Roof Roll Forming Machine Barrel Corrugator